3mm Dibond mounting frame

A lightweight alternative to aluminium, dibond is perfect for archival framing and large print mounting.

When weight is an issue because of framing or transportation 3mm Dibond (aluminium composite) is a good alternative to aluminium. Weighing less than half that of aluminium this material is composed of a dark plastic core with a thin layer of aluminium coated on each side. This archival mounting solution is perfect for very large pieces and touring exhibitions.

  • 3mm Dibond
  • Archival
  • Lightweight
  • Exhibition quality
  • Resistant to bowing
  • Suitable for framing
  • Supplied with wall fixings
  • Long or short term display

Prices for 3mm Dibond mounting

Show prices Excl. VAT Incl. VAT
inches mm Wood split batten
fixings (£)
Aluminium subframe
fixings (£)
No
fixings (£)
10×8 254×203 35.25 50.00 27.90
12×10 305×254 39.60 50.00 27.90
12×16 305×406 47.70 54.00 34.20
A3 420×297 47.70 54.00 34.20
20×16 508×406 56.70 61.20 42.75
20×24 508×610 64.80 81.00 49.95
A2 594×420 64.80 81.00 49.95
30×20 762×508 76.50 94.50 60.30
30×30 762×762 91.80 126.00 71.55
36×24 914×610 91.80 126.00 75.15
A1 841×594 91.80 126.00 75.15
40×30 1016×762 121.50 162.00 109.15
40×40 1016×1016 211.50 127.80
48×36 1220×914 220.50 139.05
A0 1189×841 220.50 139.05
48×40 1220×1016 264.25 155.00
48×48 1220×1220 315.00 199.00
60×40 1524×1016 320.00 220.00
60×48 1524×1220 375.00 250.00
72×48 1830×1220 424.80 273.00
96×48 2440×1220 475.00 319.00
Prices stated above are in addition to the cost of the print

If you have any questions about Dibond mounting, please give us a call on 01273 708222 or email us.

Other mounting options

Split batten fixing

An MDF batten is approximately 9mm and will give the impression of your artwork “floating” from the surface of the wall.

One set of battens is fixed to the back of the MDF.

The second set of battens is screwed to the wall.

The image is then hung by slotting the battens on the back of the MDF into the wall battens.

Subframe fixing

Subframes are advised for hanging larger mounted prints and Perspex mounts.

A subframe is an aluminium profile attached to the reverse of the mounted material.

This is then hung onto a batten fixed to the wall.

A subframe moulding will give the impression of your artwork “floating” from the wall. The moulding is approximately 20mm wide.


If you’d like to speak to an expert about mounting options, please get in touch on 01273 708222 or email us